Ford Ranger interior LED upgrade: what actually fits

Short answer: AutoGlowLED sells a direct-fit LED interior light kit for the Ford Ranger. The kit comes in 8, 11, 12, 13, 14, 15, or 16-piece sets priced from $30.99 to $59.99, and the bulbs are tailored to your truck's model generation, so no year range is listed here. Pick the piece count that matches your Ranger's interior bulb count and choose from Red, White, or Warm White.

Full kit details here: AutoGlowLED Ford Ranger LED Interior Light Kit.

Ford Ranger LED interior light kit

Which kit fits your Ford Ranger

Stock interior bulbs in a Ranger are dim and yellow, which makes the cabin feel older than the truck actually is. An LED kit swaps those out for brighter, cleaner light that comes on instantly and draws less power. Depending on which kit you buy, you get bulbs for the dome, map, trunk, license plate, footwell, vanity, and glove box areas. The kit also includes a free pry tool so you can pop the housings without scratching the plastic.

Model year Kit size Color Price
all years 12 pcs Red $35.99
all years 16 pcs Red $31.99
all years 13 pcs Red $37.99
all years 14 pcs Red $37.99
all years 15 pcs Red $31.99
all years 14 pcs WHITE $30.99
all years 8 pcs WHITE $31.99
all years 12 pcs WHITE $37.99
all years 13 pcs WHITE $37.99
all years 11 pcs WHITE $35.99
all years 11 pcs Red $34.99
all years 16 pcs WHITE $31.99
all years 15 pcs WHITE $31.99
all years 14 pcs Warm White $57.99
all years 11 pcs Warm White $35.99
all years 12 pcs Warm White $30.99
all years 13 pcs Warm White $31.99
all years 8 pcs Red $31.99
all years 16 pcs Warm White $59.99
Color options

Installing it

Work with the interior lights off and the key out of the ignition before you touch any housing. Use the included pry tool to gently work around the lens edges, and keep a small flathead or trim tool handy for stubborn clips. Test each bulb as you go so you are not chasing a bad connection after the panels are back in place.

  1. Pop the lens covers off. They clip in, and they come off with a firm pull. Start at one corner.
  2. Pull the old bulb out. Push the new LED in.
  3. Turn the light on. If it does not light up, pull it out and flip it 180 degrees. LEDs are polarity sensitive.
  4. Work through the remaining locations the same way, then re-seat any loose lens.

Common questions

Will this LED kit fit my Ford Ranger? AutoGlowLED lists the Ford Ranger as one of the supported models. The kit is vehicle-specific, so you need to select the piece count that matches your Ranger's generation and interior layout. No year range is listed, so double-check your truck's bulb count before ordering.

How many bulbs come in the kit? The kit is available in 8, 11, 12, 13, 14, 15, and 16-piece sets. The right count depends on your specific Ranger and how many interior bulbs it uses. AutoGlowLED tailors the contents to each model generation, so the pieces are not universal across every truck.

What colors can I get? You can choose Red, White, or Warm White. Warm White stays closer to the factory look, while White gives you a brighter, cooler output. Red is the most dramatic option if you want a custom interior feel.

How much does the kit cost? Prices run from $30.99 to $59.99 depending on the piece count and color you pick. There are 40 total variants across the lineup. The kit also includes a free pry tool for installation.

Do I need any special tools to install it? No special tools are required. The kit comes with a free pry tool to help you remove the light housings safely. A basic trim tool or small flathead can help with tight clips, but the included tool handles most of the work.

Specs

Brand AutoGlowLED
Fits Ford Ranger see listing
Kit size 8 pieces, 11 pieces, 12 pieces, 13 pieces, 14 pieces, 15 pieces, 16 pieces
Colors Red, WHITE, Warm White
Installation Plug and play, no wiring

Get the right one

AutoGlowLED Ford Ranger LED Interior Light Kit

Pick your year and color from the dropdown.