Short answer: The AutoGlowLED 12-piece LED interior light kit fits the Seat Ateca 2016-2019. It replaces your factory interior bulbs with Canbus error-free LEDs, and it's available in four colors: purple, yellow, white, and red. The price runs from $32.99 to $34.99.
Full kit details here: AutoGlowLED Seat Ateca LED Interior Light Kit.
Which kit fits your Seat Ateca
Factory interior bulbs in the Ateca are dim and yellow, and they don't do much for visibility when you're looking for something in the footwell or the back seat. This kit swaps them out for LEDs that are brighter and rated to last up to 50,000 hours. You get full interior coverage with 12 pieces, including dome and map lights, vanity, trunk, glove box, and footwell bulbs. Canbus compatibility means no error codes on the dash, so it's a clean upgrade.
| Color | Price | In stock |
|---|---|---|
| PURPLE | $33.99 | 864 |
| YELLOW | $34.99 | 862 |
| WHITE | $32.99 | 856 |
| Red | $32.99 | 736 |
Installing it
Pop off the plastic lens covers with a trim tool or a small flathead wrapped in tape to avoid scratches. Pull the old bulb, push in the LED, and if it doesn't light up, flip it 180 degrees and reinsert. Work with the ignition off and test each light before you snap the cover back on.
- Pop the lens covers off. They clip in, and they come off with a firm pull. Start at one corner.
- Pull the old bulb out. Push the new LED in.
- Turn the light on. If it does not light up, pull it out and flip it 180 degrees. LEDs are polarity sensitive.
- Work through the remaining locations the same way, then re-seat any loose lens.
Common questions
Will this kit fit my 2017 Seat Ateca? Yes, the AutoGlowLED kit is designed for Seat Ateca 2016-2019. It's a 12-piece set that replaces the interior bulbs with Canbus error-free LEDs.
What colors does the kit come in? You can choose from purple, yellow, white, or red. The kit is available in four variants, and the price is between $32.99 and $34.99.
Do I need any special tools to install it? No special tools are required. A plastic trim tool helps remove the lens covers without scratching, and the LEDs are plug-and-play. If a bulb doesn't light, just flip it 180 degrees.
Will these LEDs cause error codes on my Ateca? No, the kit is Canbus error-free. That means it won't trigger dashboard warnings or error codes in your Seat Ateca.
Specs
| Brand | AutoGlowLED |
| Fits | Seat Ateca see listing |
| Kit size | see listing |
| Colors | PURPLE, YELLOW, WHITE, Red |
| Canbus | Error free |
| Installation | Plug and play, no wiring |
Get the right one
AutoGlowLED Seat Ateca LED Interior Light Kit
Pick your year and color from the dropdown.