Chevrolet Cruze interior LED upgrade: what actually fits

Short answer: AutoGlowLED makes a Canbus LED interior light kit for the Chevrolet Cruze, and you pick the kit by how many bulbs you want to replace. Kits come in 6, 7, 8, 9, 11, 12, and 13 pieces, with 40 variants covering different model year ranges and color choices. Prices run from $30.99 to $61.99, and the kit is Canbus compatible so it should not throw error codes.

Full kit details here: AutoGlowLED Chevrolet Cruze LED Interior Light Kit.

Chevrolet Cruze LED interior light kit

Which kit fits your Chevrolet Cruze

Stock interior bulbs in a Cruze are dim and yellow, which makes the cabin feel older than it is. Swapping to LEDs gives you clean white light, or you can go with red or purple if you want something different. The kit replaces the usual interior lights, including map, dome, trunk, vanity, and license plate bulbs, so you get a complete refresh instead of just one or two. It is plug-and-play and includes a removal tool, so you are not splicing wires or hunting for extra parts.

Model year Kit size Color Price
all years 13 pcs PURPLE $31.99
all years 11 pcs PURPLE $32.99
all years 6 pcs PURPLE $30.99
all years 9 pcs PURPLE $31.99
all years 8 pcs PURPLE $31.99
all years 7 pcs PURPLE $30.99
all years 13 pcs Red $32.99
all years 12 pcs Red $31.99
all years 7 pcs Red $37.99
all years 11 pcs WHITE $31.99
all years 6 pcs WHITE $37.99
all years 9 pcs WHITE $30.99
all years 8 pcs WHITE $38.99
all years 7 pcs WHITE $37.99
all years 12 pcs WHITE $31.99
all years 13 pcs WHITE $32.99
all years 9 pcs Red $30.99
all years 8 pcs Red $38.99
Color options

Installing it

Work with the car off and the keys out of the ignition so you do not blow a fuse while swapping bulbs. A plastic trim tool is your friend here, since interior lens covers and housings are held by clips that can break if you pry with a screwdriver. Test each bulb as you go, because LEDs are polarity sensitive and may need to be flipped in the socket to light up.

  1. Pop the lens covers off. They clip in, and they come off with a firm pull. Start at one corner.
  2. Pull the old bulb out. Push the new LED in.
  3. Turn the light on. If it does not light up, pull it out and flip it 180 degrees. LEDs are polarity sensitive.
  4. Work through the remaining locations the same way, then re-seat any loose lens.

Common questions

Will this kit fit my specific Chevrolet Cruze year? The kit is vehicle-specific for the Chevrolet Cruze and other Chevy models, but you need to match the variant to your model year range. There are 40 variants listed, so check the compatibility section before ordering. If your year is not listed, the kit may not be the right fit.

Do I need to worry about error codes or flickering? This is a Canbus-compatible kit, which means it is designed to work with the Cruze's electrical system without triggering bulb-out warnings. That said, Canbus compatibility can vary by trim and model year, so it is always smart to verify your specific application. If you do see a flicker, a resistor may be needed, but that is not included.

What colors and piece counts are available? You can choose from purple, red, or white light, and kits range from 6 to 13 pieces. The piece count determines how many bulbs you replace, so a larger kit covers more locations. Prices range from $30.99 to $61.99 depending on the variant you select.

Is this a complete kit or do I need extra bulbs? Each kit is a complete interior LED package for the locations it covers, which can include map, dome, trunk, vanity, and license plate lights depending on the variant. It also includes a removal tool to help with installation. You should not need to buy additional bulbs if you order the correct piece count for your car.

Specs

Brand AutoGlowLED
Fits Chevrolet Cruze see listing
Kit size 6 pieces, 7 pieces, 8 pieces, 9 pieces, 11 pieces, 12 pieces, 13 pieces
Colors PURPLE, Red, WHITE
Canbus Error free
Installation Plug and play, no wiring

Get the right one

AutoGlowLED Chevrolet Cruze LED Interior Light Kit

Pick your year and color from the dropdown.