Peugeot 206 207 307 308 LED Interior Lights — Bulb Sizes & Install Guide

Peugeot 206 207 307 308 LED Interior Lights — Bulb Sizes & Install Guide

Peugeot hatches like the 206, 207, 307, and 308 are everywhere on European roads, and they all leave the factory with the same dim, yellow interior bulbs. A full LED swap is one of the easiest upgrades you can make to a Peugeot interior.

This guide covers the 206, 207, 307, and 308, with the exact bulb sizes and installation notes.

Peugeot bulb sizes (206, 207, 307, 308)

Position 206/207 307/308
Dome light 42mm festoon 42mm festoon
Map / reading lights T10 (W5W) T10 (W5W)
Boot / trunk light Festoon Festoon
License plate lights T10 (W5W) T10 (W5W)
Footwell lights T10 (W5W) T10 (W5W)

Peugeot changed bulb types across generations. The 206 and 207 use slightly different map light bulbs than the 307 and 308. Check your specific model before ordering.

Does Peugeot throw error codes with LEDs?

Mostly no. Peugeot does not aggressively monitor interior bulb resistance on these models, so standard LED bulbs usually work without flicker or warnings.

A few higher-spec 308s with the interior light package do monitor some circuits, and if you get a flicker, error-free CANBUS bulbs solve it.

Installation on the 206, 207, 307, and 308

  1. Pop the lens covers off with a plastic trim tool. Peugeot covers are clip-based and come off from the edge.
  2. Remove the old bulbs. Pull straight out, rocking gently if stuck.
  3. Insert the new LEDs. Plug and play.
  4. Test before closing. If a bulb doesn't light, flip it 180 degrees.
  5. Snap the covers back on.

The 308 dome light is straightforward, taking less than a minute. The 206 and 207 boot light needs a bit more patience but is still easy.

What color temperature looks best on a Peugeot?

6000K for a crisp modern white that matches the LED running lights on newer 308s. If you prefer a warmer factory look, 5000K is a solid choice.

Frequently asked questions

Are LED interior lights legal on a Peugeot? Yes. Interior lighting is not regulated like headlights or number plate lights.

Why does my new LED flicker? Usually a non-CANBUS bulb on a monitored circuit, or a loose connection. Error-free bulbs fix the first, reseating the bulb fixes the second.

Can I change all the interior bulbs without tools? Mostly. A plastic trim tool helps, but a thin plastic card works for the lens covers.

The bottom line

The 206, 207, 307, and 308 are easy cars to upgrade to LED interior lighting. No serious CANBUS headaches, simple access, and a completely different cabin at night. Under half an hour for the full interior.

Browse custom-fit LED interior kits for Peugeot →

Related

Browse the full range of Peugeot LED interior light kits, or see all LED interior light kits.