Short answer: AutoGlowLED makes a kit for the Toyota Sequoia covering 2000 through 2021, split into three ranges: 2000-2007, 2008-2017, and 2018-2021. You choose a 16, 20, or 23 piece kit, and there are 12 variants total across colors and sizes. Prices run $30.99 to $58.99.
Full kit details here: AutoGlowLED Toyota Sequoia LED Interior Light Kit.
Which kit fits your Toyota Sequoia
Factory interior bulbs in a Sequoia are dim and yellow, and they burn out one at a time. This kit swaps them for LEDs rated up to 50,000 hours, so you stop buying replacements every couple of years. You get a much brighter cabin, and the bulbs are Canbus error-free, meaning they plug into stock sockets with no wiring changes. Color options include white, yellow, red, and purple if you want something other than stock-looking light.
| Model year | Kit size | Color | Price |
|---|---|---|---|
| 2000-2007 | 20 pcs | PURPLE | $55.99 |
| 2018-2021 | 16 pcs | YELLOW | $51.99 |
| 2018-2021 | 16 pcs | PURPLE | $52.99 |
| 2008-2017 | 23 pcs | PURPLE | $58.99 |
| 2018-2021 | 16 pcs | WHITE | $31.99 |
| 2008-2017 | 23 pcs | WHITE | $54.99 |
| 2008-2017 | 23 pcs | YELLOW | $58.99 |
| 2000-2007 | 20 pcs | YELLOW | $55.99 |
| 2008-2017 | 23 pcs | Red | $54.99 |
| 2000-2007 | 20 pcs | Red | $51.99 |
| 2000-2007 | 20 pcs | WHITE | $53.99 |
| 2018-2021 | 16 pcs | Red | $30.99 |
Installing it
Work with the interior lights off and the key out of the ignition. Plastic trim tools are your friend here, because prying at lens covers with a flathead screwdriver is how you crack brittle clips on an older Sequoia. Test each bulb as you go before you snap the cover back on, since LEDs are polarity sensitive and may need to be flipped in the socket.
- Pop the lens covers off. They clip in, and they come off with a firm pull. Start at one corner.
- Pull the old bulb out. Push the new LED in.
- Turn the light on. If it does not light up, pull it out and flip it 180 degrees. LEDs are polarity sensitive.
- Work through the remaining locations the same way, then re-seat any loose lens.
Common questions
Will this kit fit my 2015 Toyota Sequoia? Yes. The kit covers the 2008-2017 generation, so a 2015 falls in that range. Pick your piece count and color when ordering, and the bulbs are designed for the stock sockets.
Do I need to do any wiring or add resistors? No. The bulbs are Canbus error-free and plug into the factory sockets with no modification. That means no cutting, splicing, or extra modules.
How long do these LEDs last compared to the original bulbs? They are rated up to 50,000 hours. For most drivers that means you install them once and do not think about interior bulbs again for the life of the vehicle.
What colors can I get? White, yellow, red, and purple. White is the usual pick if you want a clean, bright cabin, while the other colors are for people who want a specific look.
How much does the kit cost? Prices range from $30.99 to $58.99 depending on the variant you choose. There are 12 variants total, covering the different year ranges, piece counts, and colors.
Specs
| Brand | AutoGlowLED |
| Fits | Toyota Sequoia 2000-2007, 2008-2017, 2018-2021 |
| Kit size | 16 pieces, 20 pieces, 23 pieces |
| Colors | PURPLE, YELLOW, WHITE, Red |
| Installation | Plug and play, no wiring |
Get the right one
AutoGlowLED Toyota Sequoia LED Interior Light Kit
Pick your year and color from the dropdown.