Audi A4 S4 RS4 B8 Sedan Avant 2008-2015 ZITWO LED Interior Light Kit,

Audi A4 S4 RS4 B8 Sedan Avant 2008-2015 ZITWO LED Interior Light Kit, Canbus Error Free Plug and Play Dome Door Bulbs | AutoGlowLED

$43.99

Color purple warm white ice blue white

Model B8 Avant B8 Sedan

Product Overview

Upgrade your Audi A4, S4, or RS4 B8 (2008–2015) with a complete 17-piece (Sedan) or 20-piece (Avant) LED interior light kit that delivers crisp, 6000K white illumination. Each bulb is engineered as a direct, plug-and-play replacement for the original factory halogen bulbs, instantly modernizing your cabin with brighter, more uniform light. This kit covers every interior light point—from dome and map lights to vanity mirrors, trunk, glove box, door, and license plate lights—ensuring a cohesive, premium look throughout your vehicle.

Compatible Models

Audi A4 B8 Sedan (2008–2015)
Audi A4 B8 Avant (2008–2015)
Audi S4 B8 Sedan (2008–2015)
Audi S4 B8 Avant (2008–2015)
Audi RS4 B8 Sedan (2008–2015)
Audi RS4 B8 Avant (2008–2015)

Note: Sedan kits include 17 bulbs; Avant kits include 20 bulbs (extra rear dome/map and cargo lights).

Key Features

100% Canbus Error-Free – Built-in smart drivers prevent dashboard warning lights and flickering, ensuring seamless integration with your Audi’s electrical system.
6000K Cool White Light – Pure, daylight-matching brightness that dramatically outperforms stock halogen bulbs, improving visibility and reducing eye strain.
Plug-and-Play Installation – No wiring, cutting, or modifications required. Simply remove the old bulb and insert the new LED—if it doesn’t light, flip it 180 degrees.
50,000-Hour Lifespan – Premium LED chips rated for long-term reliability, saving you from frequent bulb replacements and reducing power consumption.
Custom Fit for B8 Sedan & Avant – Each kit is tailored to your specific body style, with the correct bulb sizes and quantities for every interior light location.

Installation Guide

Turn off all interior lights before starting. Use a plastic trim tool or flathead screwdriver wrapped in cloth to gently pry off the lens or housing of the light you are replacing. The old bulb may be hot—allow it to cool.
Remove the stock bulb by pulling it straight out of the socket. Insert the new LED bulb into the same socket. If the bulb does not light immediately, remove it, rotate it 180 degrees, and reinsert.
For festoon-style bulbs (e.g., dome lights), gently bend the metal pin clips inward so they grip the LED bulb tightly. Snap the lens or housing back into place. Repeat for all remaining light positions.

Frequently Asked Questions

How much brighter are these LEDs compared to the original halogen bulbs?

Our 6000K LEDs produce approximately 300% more light output than factory halogen bulbs. The light is pure white and evenly distributed, eliminating yellow hotspots and dark corners. Users consistently report a dramatic improvement in cabin visibility, especially in map lights and trunk areas.

Will these LEDs cause CANBUS errors or hyper-flash on my Audi?

No. Every bulb in this kit is engineered with a built-in Canbus error-free decoder. This means the LEDs communicate correctly with your Audi’s body control module, preventing dashboard warning lights, flickering, or rapid flashing. They are fully compatible with the B8 platform’s electrical system.

How do I know the bulbs will fit my specific B8 model (Sedan vs. Avant)?

We provide two distinct kits: a 17-piece set for B8 Sedans and a 20-piece set for B8 Avants. The Avant kit includes extra bulbs for the rear dome/map area and additional cargo lighting. Simply select your body style when ordering. All bulbs are pre-matched to the correct socket types (T10, festoon, etc.) for your vehicle year range (2008–2015).