AutoGlowLED LED Interior Light Kit 17Pcs Canbus Error Free Plug and Pl

AutoGlowLED LED Interior Light Kit 17Pcs Canbus Error Free Plug and Play For Peugeot Traveller E-Traveller 2016-2023 | AutoGlowLED

$39.99

Color warm white ice blue purple white

Product Overview

Upgrade your Peugeot Traveller or e-Traveller (2016–2023) with the AutoGlowLED LED Interior Light Kit, a complete 17-piece set that replaces every factory bulb for a crisp, modern glow. Engineered for instant plug-and-play installation, this kit delivers 6000K cool white light that dramatically improves visibility inside the cabin, trunk, and license plate area. Each bulb is built to last up to 50,000 hours, saving you power and eliminating the hassle of frequent replacements.

Compatible Models

AutoGlowLED LED Interior Light Kit – Fits the following vehicles (multi-year):

Peugeot Traveller (2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023)
Peugeot e-Traveller (2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023)

Note: This kit is also compatible with other Peugeot models using the same bulb sizes; verify your vehicle's bulb types if unsure.

Key Features

100% Canbus Error Free – Built-in resistors prevent dashboard warning lights and flickering, ensuring seamless integration with your vehicle's electronics.
6000K Cool White Light – Delivers a bright, daylight-like illumination that reduces eye strain and enhances interior visibility without the yellow tint of halogen bulbs.
Plug-and-Play Installation – No wiring, cutting, or modifications required. Simply remove your old bulbs and insert the new LEDs—they fit directly into the existing sockets.
Ultra-Long Lifespan – Rated for up to 50,000 hours of continuous use, meaning you may never need to replace them again under normal driving conditions.
Custom Fit for Peugeot Traveller/e-Traveller – Each of the 17 bulbs is specifically sized for your vehicle's dome, map, vanity, trunk, glove box, and license plate lights, ensuring a snug, rattle-free fit.

Installation Guide

Turn off the lights and let bulbs cool. Before starting, switch off the interior lights you plan to replace. If the vehicle has been running, allow halogen bulbs to cool for a few minutes to avoid burns.
Remove the old bulb. Gently pry off the lens cover using the included installation tool or a flathead screwdriver. Carefully extract the stock bulb—if it's a festoon type, slide it out; if it's a twist-lock, rotate counterclockwise.
Install the new AutoGlowLED bulb. Insert the LED bulb into the socket. If it doesn't light up immediately, flip it 180 degrees (LEDs are polarity-sensitive). For festoon bulbs, gently bend the metal clips closer together to ensure a tight, secure fit. Replace the lens cover and test the light.

Frequently Asked Questions

How does the brightness of these LEDs compare to the original halogen bulbs?

AutoGlowLED bulbs produce significantly more light than factory halogens—typically 300% to 500% brighter at the same wattage. The 6000K color temperature also makes the light appear whiter and clearer, improving visibility for reading maps, finding items in the dark, and illuminating the cabin. Unlike halogens, these LEDs do not dim over time and maintain consistent output throughout their lifespan.

Will these bulbs cause CANBUS errors or hyper-flash on my Peugeot Traveller?

No. Every bulb in this kit is engineered with built-in Canbus-ready circuitry and load resistors to prevent error messages, flickering, or rapid flashing. They are specifically tested for Peugeot models (including the Traveller and e-Traveller) to ensure full compatibility with the vehicle's computer system. In rare cases where a bulb does not light, simply flip it 180 degrees to correct polarity.

How do I know these bulbs will fit my specific Peugeot Traveller or e-Traveller?

This kit is designed as a direct replacement for all interior lights in the Peugeot Traveller and e-Traveller from 2016 to 2023. The 17-piece set covers every socket type used in these models, including festoon, T10 wedge, and BA9S bases. If you have a different Peugeot model or a special edition, please contact us with your vehicle details before ordering—we will confirm fitment or provide a compatible alternative. All bulbs are backed by a 2-year warranty and a 30-day return policy if they do not fit as described.